مبدل dc-dc کاهنده 5 آمپر با قابلیت کنترل جریان ولتاژ خروجی و همراه با نشانگر و کیس محافظ

Module highlights:
 1. With crystal shell, safe, practical, convenient, beautiful.
 2. Onboard voltage, current, power meter, you do not have a multimeter can also easily use this module, easier and more intuitive.
 3. Onboard USB interface, you can easily charge your digital products. (Note: USB output voltage and module output voltage, not fixed 5V output, USB device to charge before you confirm)
4. High power, high efficiency, 5A, low ripple

5. Three functions:
 (1) as a general step-down module with overcurrent protection capability;
 (2) as a variety of voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charger used for solar panels, wind turbines and other occasions;
 (3) as a high power LED constant current drive module used;
 6. With constant voltage and constant current two modes, there are indicators that the module is currently in which mode.
 7. When used as a lithium battery charger, you can set the float voltage and charge current size, with indicator light That is being charged or filled;
 
8. With current limiting protection function, even if the output short circuit will not burn the module.
 
9. Onboard voltage, ammeter can be self-calibration
 
Input voltage: 5-36V
 Output voltage: 1.25-32V continuously adjustable
 Output current: adjustable, maximum 5A (recommended for use within 4.5A)
Output power: up to 75W (recommended in the use of 50W)
Operating temperature: -40 ~ +85 degrees
Operating frequency: 180KHz
Conversion efficiency: up to 96%
Short circuit protection: Yes
Over-temperature protection: Yes (over-temperature automatically turn off the output)
 Input Reverse Protection: None, (if required, enter the high-current diode in the input string)
 Installation: 4- 3mm screws
 Wiring method: terminal or welding terminal, V-IN for the input, V-OUT for the output
 Module size: length 68.2mm wide 38.8mm high 15mm
 Weight: 73g