ماژول رله 5 ولت یک کاناله OMRON SSR
04D011
موجودی این محصول به صورت موقت به پایان رسیده است.
محصولات مشابه
-
ماژول تایمر 0 تا 60 ثانیه 12 ولت DC
650,000 ریال
-
ماژول تایمر 12 ولت قابل تنظیم همراه با رله و نمایشگر
1,300,000 ریال
-
ماژول کنترلر دما(ترموستات)W1701
370,000 ریال
-
ماژول رله 12 ولت 30 آمپر
415,000 ریال
-
-
ماژول تایمر با تغدیه 220 ولت قابل تنظیم تا 999 دقیقه
1,600,000 ریال
-
ماژول رله 5 ولت هشت کاناله با نشانگر LED
1,000,000 ریال
-
ماژول ریموت کنترلر با برد 3000 متر دو کاناله با رله 30 آمپر
2,850,000 ریال
-
ماژول وای فای کنترلر با هسته esp8266
855,000 ریال
-
سنسور جریان آب Water Flow Sensor
750,000 ریال
-
سنسور تعیین سطح مایع - سوئیچ شناور M10
345,000 ریال
-
-
سوئیچ جیوه ای 12 میلی متری
50,000 ریال
-
ماژول روتاری انکودر KY-040
145,000 ریال
Input section:
the DC +: positive power supply (power supply voltage by relay)
DC-: negative one
CH: relay module signal triggering end (high trigger enabled)
High and low meaning:
High-level trigger refers to the trigger side (IN) and the negative power supply has a positive voltage between the positive and the power supply is usually connected to the trigger side of a trigger, when the trigger voltage or trigger a positive trigger Voltage, the relay is pull.
Low-level trigger refers to the voltage between the signal trigger terminal and the negative terminal of the power supply is OV, or the voltage of the trigger terminal is lower than the voltage of the positive terminal of the power supply. The negative side of the power supply is connected to the trigger side of a trigger, so that the relay is pull.
Electrical parameters:
Voltage Version Quiescent Current Operating Current Trigger Voltage Trigger Current
5V 0mA 12.5mA 3.3-5V 2mA
Product instructions:
1. Module power supply: the power must be DC, the voltage should be consistent with the relay voltage
When the trigger signal side of the trigger level, the relay will be connected, the device has electricity and work
---------------
Product Details:
Solid State Relay Module
Size: approx. 25 x 34 x 25mm, net weight: 13g
5v solid-state relay 240v 2a , the output resistance fuse is 240v 2a.
Input voltage: 5v dc (160ma)
Input voltage control signal: (0-1.5V low level, relay ON), (2.5-5V high level, relay OFF)
Quiescent current: 0MA
Trigger voltage: 0-1.5v
Trigger current: 2ma
توضیحات بیشتر:
https://www.sunfounder.com/wiki/index.php?title=1_Channel_5V_Solid_State_Relay_Module