نمایشگر 3.5 اینچ مخصوص Raspberry Pi

product manual:

This product was developed by KeDei, using the newer linux kernel system (version 4.1.19), the use of raspberry sent a newer UI desktop file system, the use of faster spi transmission of data, the whole has KeDei independent development, drive! Support Plug and Play!
 http: //www.kedei.net
 
Features:
*Use a newer version of the UI interface;
*The use of the newer kernel 4.1.19;
*Support plug and play (motherboard running time, at any time to insert the display can be normal display), support touch control;
*spi_speed for 32MHZ;
* Support the driver to install automatically.
 
How to use:
a. faster way to use the network inside the compiled file rpi_35_v6_jessie8_kernel_4_1_19.img directly burn to sd card.
b. Use the drive in the network tray.
To ensure that the network connection is normal Connect the LCD screen to the raspberry development board Copy the network drive to the raspberry (using ssh or using U disk media)
Unzip the file and start the installation.
First expand sd card sudo raspi-config Select expand_roofts then sudo reboot
    Restart the following command:
    Unzip the file tar -xzvf LCD_show_v6.tar.gz
    Jump to folder cd LCD_show_v6
    Upgrade the system sudo apt-get update first
    Back up data sudo ./LCD_backup
    Install driver sudo ./LCD35_v
    Wait for some time the system will install the driver and automatically restart
    If you want to re-use the system before installation, you can use sudo. / LCD_restore
Note: When you update the system before using, you must use this command sudo apt-mark hold raspberrypi-bootloader
    And then use the order,
    sudo apt-get update
    sudo apt-get upgrade
Otherwise it may fail after the restart
c. own network to download the patch, the kernel version of 4.1.19, their own arbitrary than what the kernel, add their own upper application protocol or the underlying kernel driver, let you progress to play their own talent