دیمر 2 کیلو وات SCR - ولتاژ 220 ولت AC

The regulator is specially modified for precision motor control circuit via multi-turn potentiometer to adjust the minimum output voltage.
There wiring position on the board:
IN connected with AC 220V, OUT connected to the output
parameter:
Voltage: AC 220V
Maximum power: 2000W
Voltage Regulator: AC 90-220V
Size: high temperature FR-4 circuit board
Weight: 45g
The regulator Used materials:
STMicroelectronics imported SCR, voltage up to 1200 volts.
Are all high-voltage capacitors,
All are metal film resistors,
ST imported trigger diode,
Precision multi-turn potentiometer,
Taiwan's main potentiometer goods manufacturers,
Material and both are fine, they are carefully selected to purchase a large number of.
Carrying fins, buyers can get our hands on,
STMicroelectronics imported special custom SCR, voltage up to 1200 volts. Current 25A (than others sell 2500w is greater)
1.6mm thick epoxy CCL, the pursuit of perfection welding work.
Instructions:
    This product series with the lamp or in electrical circuits where (that is, the lamps, and other electrical appliances disconnect any FireWire or zero line one, put this "product" of the two wires connected to both) rotary potentiometer rotating rod, you can adjust the play of light and shade, speed, pressure, temperature control effect; easy to use.
    This product is suitable for: using the new two-way high-power thyristor as current up to 25 A, a good solution to the problem of over-current electric wire in the case of cooling is too small to cause the resistance; can be easily adjusted mains the output voltage of between 90 and 220 volts ---- any adjustment, for the use of electrical appliances. Such as: furnace, hot water heater tune, dimming lamps, small motor speed, electric iron thermostat and so on. So as to achieve dimming, thermostats, pressure effect. For less than 2000 watts of electrical power use due to the large electrical power has been great, so the general home appliances or small factories enough to use. (Inductive or capacitive load power should be reduced, this regulator is equipped with two-way high-power thyristor, potentiometers are with nuts, do not add any components to use, very convenient and practical).
* Note: To prevent unscrupulous businessmen copy of the product, some parts of the regulator unified model worn!