ماژول کنترلر دما(ترموستات)W1701

 Features:
     W1701 high precision digital temperature control switch
    Control mode: heating, cooling, heat-sinking
    Temperature range: 20 °c-90 °c
    Control accuracy: 0.1 °c
    Temperature difference setting: 1°c-10 °c
    Refresh rate: 0.5S
    Input voltage: DC 12V
    Static current: ≤ 3MA  Attract current ≤ 60MA
    Output voltage: DC12V
    Output power: Max 200W
    Dimensions: 36.5 * 36.5 * 18mm
    Temperature probe: 10K thermistor B25 = 10K 3950  waterproof sensor
    Sensor Cable Lenght: About 0.5 meter
    Environmental requirements: -10-60 °c  Humidity 20%
    Application: Car,Pet House,Air conditioning,Greenhouse,Pool,Aquarium, Terrarium, Vivarium, water tanks, refrigerator,industrial equipments and All kinds Temperature Measuring Control.
 

This product uses STM8 high-speed professional temperature control chip, set the temperature control and hysteresis using binary DIP switch, with small size, easy installation, precision temperature control, hysteresis adjustable, etc., compared to professional thermostat, although not shown Screen and thermostat buttons but the control accuracy and professional no difference, and the price is only a fraction of the cost is very high, the product is fully available (liquid, mold, space) and other control heating, can also be used (box, , Water, pet room, air conditioning) and other control refrigeration, of course, in the heat situation more, for example, control the chassis, greenhouses, server cooling, set higher than the number of degrees to start less than how many degrees to stop. Intelligent, professional, focused, enterprising is our eternal pursuit of the goal, welcome in the course of the use of valuable advice and suggestions, we strive to do better!
According to their own needs according to the drawings connected to a good circuit, power supply DC12V (+12 V is positive for the negative GND)
was temperature-controlled probe placed on the need for temperature control objects
for heating: Please 12V heater connected to-H + negative)
for a refrigeration: Please cooler connected to the + C- (Note that positive and negative)
for cooling: Please cooler or cooling fan connected to the + C- (note polarity)
LED status Description
board (+ C) with output
does not light Description (0) with output
parameters Function
Description Temperature control switch board settings using DIP mode, 1-4 for the temperature control selection 5-6 for the back Difference set, from right to left in binary mode from small to large set, when the temperature control switch is fully closed state, only - H + has output, not controlled
Example: to the radiator temperature control switch, when the temperature is higher than 40 degrees when the open cooling fan, the temperature is less than 35 degrees off the cooling fan
DC12V connected to the power supply side, the cooling fan connected to the + C-
we want to set the parameters for the temperature = 40 hysteresis = 5 according
to the parameter table Known as 24 open for the temperature control 40 degrees, 5 open for the hysteresis 5 degrees other is off, set OK!