ماژول تایمر 12 ولت قابل تنظیم همراه با رله و نمایشگر

قابلیت تنظیم تا حداکثر 999 دقیقه،قابلیت تنظیم زمان قطع و زمان وصل به صورت مجزا،دارای حافظه

Product operating mode: connected after a period of time, disconnect for some time, infinite loop (with normally open normally closed contact)                                      

Display: LED Digital Display
Timing Range(Settable): 0.1~999 MINUTES
Working Voltage: DC 12V
Output Capacity: DC 5~30V, AC 220V 10A
Static Current: 20mA
Working Current: 50mA
Working Temperature: -40-85°C
PCB Size: 65 * 36 * 18mm / 2.56 * 1.42 * 0.7in (L * W * H)
PCB Weight: 24g / 0.87oz
Package Size: 11.5 * 7.5 * 2cm / 4.53 * 2.95 * 0.8in (L * W * H)

Turn on the power, the countdown time to start, the relay work.
K1 is divided into six a cycle, the first three times is set to turn on time, after three times is set off time. Click K1 hundred digital tube began to flash, then press K2, hundreds of digital changes; click K1 ten digital tube began to flash, then press the K2, ten digital changes; click K1 digital tube start Press the K2, decimal point shift,  select a good time after this set is completed. Long press K2 to open or close the digital tube, reducing power consumption.