ماژول ریموت کنترلر سه کاناله-مناسب برای درب اتوماتیک

Product information:
It is suitable for remote control of  greenhouse rolling machine, remote control electric door and window, projection screen, signal control, lifting equipment and so on.
 
Features:
1- High power:  30A relay, direct control 3000w motor reversing, to ensure long-term stable use.
 
2-Working mode user free to adjust: the user can switch interlock, jog work.
 
3- Learning type of code: can learn any code with the frequency of 3 key remote control
 
4- With manual function: you can manually control the use of remote control if the battery is dead or remote control can also be used to manually control the loss.
 
5- With limit function: can limit switch, effectively prevent the motor burned.
 
6-Protection function: interlock mode from the normal switch to reverse must be stopped in order to reverse, jog mode of work by the forward rotation must be released after 1 second to reverse, effectively prevent the motor burned.
 

Product Description:
 
Remote control receiver board, suitable for greenhouse rolling machine, remote control electric doors and windows, projection screen, signal control, lifting equipment, such as electrical control circuit. All remote control switch module products using digital wireless coding technology, no direction, the switch does not interfere with each other. 220V remote control switch circuit components full material, circuit boards are used high-quality double-sided PCB, the power part of the use of high-quality copper coil transformer, the performance is generally higher than the market commonly used inexpensive RC buck circuit to improve the life of the entire remote control switch The Buyers can compare after the purchase.
Receiver controller can withstand 30A current (peak), can directly drive AC 220V motor forward and reverse, in order to extend the receiver board life, OUR is not recommended to control high-power load, the proposed control power below 3000W.
 
Basic parameters:
 
Product Type: KGS-ZF30-1
 
Working voltage: AC190V ~ 250V
 
Operating frequency: 315MHZ
 
Contact capacity: ≤ 30A / 250VAC
 
Receiver sensitivity:> - 114dB
 
Remote control distance: 1000 meters (open space without interference)
 
Control Road: 2-way control motor positive and negative
 
Coding type: learning type
 
Learning method: press the learning button once, the indicator light, then press the button on the remote control, the lights go out, learning success.
 
Clear method: hold the learning button for 8 seconds, the indicator light and then off, clear the success.
 
Receiver size: 110 * 92 * 43mm
 
Work: (interlock / jog, the user can choose on the circuit board, the factory set to interlock)
 
Interlock: short press the remote control to turn the key, the motor is running, and then press the remote control key to stop the key, the motor stops; short press the remote control reverse button, the motor reverse, short press the remote control stop button, the motor stops. Each time you have to stop, you can operate another steering (to protect the motor).
 
Push the remote control key, the motor stops, long press the remote control reverse button is not released, the motor reverses, loosen the remote control key, the motor is turned on, Stop, one second operation after each stop (to protect the motor).