کیت ریموت کنترلر 1 کانال کد لرن همراه با گیرنده

Features:
- Small size: small size, circuit board size is only 35 * 32 * 19mm.
-Working mode User adjustable: User can modify self-locking, interlocking and jogging.
-Receiving board size: 35 * 32 * 19mm

Product Description:
The company's remote control receiver board for burglar alarm, remote control electric windows and doors, signal control, industrial control, lifting equipment, electrical control circuit. Remote control switch module relay contact independent output, very suitable for direct control of various types of load; product learning code wireless coding technology (across the air on the code), no direction, the switch does not interfere with each other. 12V remote control switch, power supply is recommended with more than 500mA DC power supply. Working mode: self-locking / interlocking / jogging User free adjustment, with a total open / total clearance function, can achieve a multi-control / multi-control one.
The receiver board can withstand up to 10 A per channel and can drive DC / AC loads directly. Each relay has a normally open (normally closed) contact. In order to prolong the service life of the receiving board, the Company does not recommend controlling the high-power load. When controlling 220V, the maximum control is 500W for each channel.
 
Basic parameters:
Product Type: KGS-B10
Working voltage: DC12V
Operating frequency : 315MHZ
Contact capacity:  10A / 250VAC; 10A / 30VDC
Receiver sensitivity : > -105dB
Remote control distance: 200 meters (free space)
The use will be based on different environmental interference and the wall has been reduced. Generally nominal
Distance of 10% -50% or so.
Control: 1 normally open (normally closed) contacts
Encoding type: learning code
Learning method:

Turn on the power indicator light for 3 seconds, the indicator light goes off, press the learning button, then the indicator light, press the remote control button indicator goes out, learning success.
Clear code method: turn on the power indicator light for 3 seconds, press and hold down the learning button after the indicator light is lit, 8 seconds after the light goes out, clear code success.
Total learning method: Turn on the power indicator light, press the learning button for 2 times, the indicator light will turn off and then turn on. When the indicator light is off, press the learning button once, , The light goes off, learning success.
The total turn off learning method: turn on the power indicator light, press the learning button once the light is lit and lit, and so on, then press the learning button, the indicator light, then press the remote control button, success.
Work: self-locking / interlocking / jog users free to choose. (Welding T for the self-locking, welding M for the point of moving type, M and T are not welded for the interlocking type)
Self-locking / interlocking / jog meaning interpretation:
Interlock: press the corresponding button on the remote control, the corresponding relay connected, then another remote control key;
Non-lock, jog: press the remote control key, the corresponding relay is connected, release the remote control key; the corresponding relay is disconnected.
Self-locking: press the remote control key, the relay is connected, then press the remote control key, the relay is disconnected.